March 31, 2010: JIG-101 V3 Released for the Electronics Industry

The Joint Industry Guide Material Composition Declaration for Electronic Products edition 3 was released on March 31, 2010. The standard provides the electronics industry with a common list of regulated substances to be declared by manufacturers and suppliers. Changes were made to the declarable substance list primarily to reflect the additional substances added to the REACH candidate list and registry of intentions.

March 23, 2010 – IPC-1752A approved

Revised IPC-1752A Material Declaration standard is Approved.  A major revision to the IPC-1752 standard for Material Declaration was approved by the committee on March 15, 2010 and was published on March 23, 2010. IPC-1752 provides the electronics industry and its supply chain with a standard reporting format for material declaration data exchange between supply chain participants.

February 2010 – IEC/TR62476 Published

Guidance for evaluation of product with respect to substance-use restrictions.  IEC 62476 TR (Guidance for evaluation of product with respect to substance use restrictions in electrical and electronic products) was approved by the International Electrotechnical Commission (IEC) in December 2009 and has now been published. The document includes high-level requirements and guidance for restricted substance controls (RSC).

March 23, 2009 – EU Commission makes available the report on recommendations for the current EU RoHS exemptions

The European Union Commission has published the report that they commissioned to assess and provide recommendations on the EU RoHS exemptions.  The report written by the Öko-Institute and Fraunhofer IZM  recommends that six of the active exemptions be withdrawn in the near term and has proposed tightened wording and timelines for other RoHS exemptions.

January 14, 2009 – ECHA prioritizes seven SVHC substances for REACH authorization

The European Chemicals Agency (ECHA) proposed a list of seven (7) priority SVHC substances that they are suggesting for initial inclusion in Annex XIV of the REACH regulation. After a pre-determined time period a manufacturer or importer will need to obtain authorization from ECHA to continue selling the product with these substance. ECHA is currently asking for input from stakeholders on the list of substances and potential exemptions to authorization.  The prioritised substances are:

  • 5-tert-butyl-2,4,6-trinitro-m-xylene (musk xylene)
  • Alkanes,C10-13,chloro (short chain chlorinated paraffins; SCCPs)
  • Hexabromocyclododecane (HBCDD) and all major diastereoisomers identified
  • 4,4’-Diamino diphenyl methane (MDA)
  • Bis (2-ethylhexyl) phthalate (DEHP)
  • Benzyl butyl phthalate (BBP) and
  • Dibutyl phthalate (DBP)

December 3, 2008 – EU Commission releases updated RoHS and WEEE Directives

The EU Commission has released proposals to update the RoHS and WEEE Directives. The new RoHS proposal:Includes Medical Equipment and Monitoring and Control Instruments within the scope of RoHS

  • Brings RoHS compliance under the CE mark
  • Establishes requirements for Conformity assessment, and market surveillance,
  • Improves the process for requesting exemptions but establishes a time limit of four years.
  • Separates the scope of the RoHS Directive from the WEEE Directive
  • Establishes definitions for several key terms, including homogeneous material and fixed installation

The key changes proposed for the WEEE Directive are clarification of scope and definitions, more ambitious, but flexible recovery and recycling targets, strengthened enforcement, and some level of harmonization to registration and reporting systems.

October 10, 2008 – IEC PAS 62596 on Sample Disjointment is Approved

This guidance document is particularly useful given that a significant number of errors in testing are caused by initial errors in obtaining and preparing samples. The draft for a Publically Available Specification (PAS) on “Sample Disjointment” for purposes of restricted substance testing was approved by IEC National Committees when the voting period closed on October 10, 2008.

The PAS 62596 document will be publicly released within a couple months.